Polycom realpresence 1800 Administrator's Manual page 822

The MCMS System Flags
Flag
QOS_IP_VIDEO
QOS_MANAGEMENT_NETWORK
REDIAL_INTERVAL_IN_SECONDS
REDUCE_CAPS_FOR_REDCOM_
SIP
REDUCE_CAPS_FOR_REDCOM_
SIP
REJECT_INCORRECT_PRECEDE
NCE_DOMAIN_NAME
REMOVE_EP_FROM_LAYOUT_ON
_NO_VIDEO_TIMER
REMOVE_H323_EPC_CAP_TO_N
ON_POLYCOM_VENDOR
Polycom®, Inc.
Description
Used to select the Diffserv priority of video packets when DiffServ
is the is the selected method for packet priority encoding.
For any given DSCP level, the flag must be set to the full 8-bit
hexadecimal value of the DS/TOS byte, which contains the DSCP
level as its upper six bits.
For example, assuming that a DSCP level of 34 decimal is
required: the binary representation of 34 is 0b100010, which,
when placed into the upper six bits of the DS/TOS byte, becomes
0b[100010]00, or 0b1000 1000 = 0x88 hex. Thus the flag value
should be set equal to 0x88.
Default: 0x30
Enter the DSCP value for the RMX Management Network.
Default: 0x10
Range: 0x00 - 0x3F
Enter the number of seconds that the Collaboration Server should
wait before successive re dialing attempts.
Range: 0-30 (Default: 10)
To accommodate deployments where some devices have limits on
the size of the SDP payload in SIP messages (such as LSCs from
Redcom running older software versions), when the flag value =
YES, the SDP size is less than 2kb and includes only one audio
and one video media line.
Default: NO
To accommodate Redcom's SDP size limit, when the flag value =
YES, the SDP size is less than 2kb and includes only one audio
and one video media line.
Default: NO
When set to YES, when the Precedence Domain of a SIP dial-in
call does not match the Precedence Domain of the RMX, the call
is rejected. For more information, see
Precedence and Preemption).
Possible values: YES/NO
Default: No
Enables the removal of empty video cells from a Video Layout.
Used to disable EPC protocol. Use of Polycom's proprietary
protocol, High Profile, EPC, may result in interoperability issues
when used with other vendors' endpoints.
Possible values: YES / NO
Default: NO
System Configuration Flags
MLPP (Multi Level
Add?








791