Gateway Ivr Dialing For Ip Participants - Polycom realpresence 1800 Administrator's Manual

Gateway Calls
Optional:
[GW Profile ID]*[Destination Number, first participant]*[Destination Number,
second participant]**[destination number]......*[Destination Number, tenth
participant]@IP address of the Collaboration Server signaling host
Optional:
[MCU prefix in SIP Proxy][GW Profile ID]*[Destination Number, first
participant]*[Destination Number, second participant]**[destination
number]......*[Destination Number, tenth participant]@domain name
For example, if the GW Profile ID is 2000, the domain name is service.polycom.com, and the destination
number is 3456, enter: 2000*3456@service.polycom.com.
If using the IP address of the Collaboration Server signaling host (for example, 172.22.188.22) instead of
the domain name enter: 2000*3456@172.22.188.22.
To invite two participants IP: 3456 and ISDN: 9251444, enter: 2000*3456*9251444@service.polycom.com.
To invite two participants IP: 3456 and PSTN: 9251234, enter:
912000*3456**9251234@service.polycom.com.

Gateway IVR Dialing For IP Participants

Can be used by IP endpoints when the destination dialing string includes the address of the MCU only. This
is the same flow as the dialing method used for ISDN/PSTN calls, however it is less recommended for IP
participants. For details, see Dialing via Gateway IVR for ISDN Participants.
Dialing from H.323 Endpoints
Dialing String and Call Flow from IP Endpoint to ISDN Endpoint
[MCU prefix in GK] - the prefix with which the Collaboration Server is registered to the gatekeeper.
[GW Profile ID] - The ID of the Gateway Profile to be used for the gateway call and the IVR message.
The dialing string format is:
[MCU prefix in GK][GW Profile ID]
For example, if the MCU Prefix in the GK is 91 and the GW Profile ID is 2000 enter: 912000.
Polycom®, Inc. 634