Flag Settings - Polycom realpresence 1800 Administrator's Manual

Flag Settings

Setting the Maximum CP Resolution for Conferencing
The MAX_CP_RESOLUTION flag value is applied to the system during First-time Power-up and after a
system upgrade. The default value is HD1080.
All subsequent changes to the Maximum CP Resolution of the system are made by selections in the Max
CP Resolution pane of the Resolution Configuration dialog box.
The Maximum CP Resolution of the Collaboration Server can be set to one of the following resolutions:
● HD 1080p60
● HD 1080p30
● HD 720p30
● SD 30
● CIF 30
Minimum Frame Rate Threshold for SD Resolution
The MINIMUM_FRAME_RATE_THRESHOLD_FOR_SD System Flag can be added and set to prevent low
quality, low frame rate video from being sent to endpoints by ensuring that an SD channel is not opened at
frame rates below the specified value. For more information see
Additional Video Resolutions
The following higher video quality resolutions are available:
MPMRx Supported Resolutions
Resolution Name
CIF
WCIF
WSD
W4CIF
HD 720p
HD 1080p
HD 1080p
The video resolution transmitted to any endpoint is determined by the endpoint's capabilities, the
conference line rate, the Conference Profile's Motion and Sharpness setting.
Polycom®, Inc.
Video Protocols and Resolution Configuration for CP Conferencing
Resolution in Pixels
352 x 288
512 x 288
848 x 480
1024 x 576
1280 x 720
1920 x 1080
1920 x 1080
Modifying System
Frames per Second
50
50
50
30
60
30
60
Flags.
120