Polycom realpresence 1800 Administrator's Manual page 532

Default IP Network Service – IP
Field
Signaling Host IP
Address
Media Card 1 IP Address
Media Card 2 IP Address
(Collaboration Server
2000/4000)
Media Card 3 IP Address
(Collaboration Server
4000)
Media Card 4 IP Address
(Collaboration Server
4000)
Subnet Mask
Polycom, Inc.
Description
On RealPresence Collaboration Server 1800 this field is disabled as only one IP
address is used for signaling and media transmission.
Enter the address to be used by IP endpoints when dialing in to the MCU.
Dial out calls from the Collaboration Server are initiated from this address.
This address is used to register the Collaboration Server with a Gatekeeper or a
SIP Proxy server.
Collaboration Server 1800: Enter the IP address of the media card to be used
by IP endpoints when dialing in to the MCU.
Collaboration Server 2000/4000: Enter the IP address of the first media card
as provided by the network administrator.first media card
Endpoints connect to conferences and transmit call media (video, voice and
content) via these addresses.
Collaboration Server 2000/4000: Enter the IP address of the second media
card if installed.
Endpoints connect to conferences and transmit call media (video, voice and
content) via these address.
Collaboration Server 4000: Enter the IP address of the third media cards if
installed.
Endpoints connect to conferences and transmit call media (video, voice and
content) via these addresses.
Collaboration Server 4000: Enter the IP address of the fourth media cards if
installed.
Endpoints connect to conferences and transmit call media (video, voice and
content) via these addresses.
Enter the subnet mask of the MCU.
Default value: 255.255.255.0.
IP Network Services
501