Polycom realpresence 1800 Administrator's Manual page 809

Collaboration server rmx
Hide thumbs Also See for realpresence 1800:
Table of Contents

Advertisement

The MCMS System Flags
Flag
ISDN_RESOURCE_POLICY
ITP_CERTIFICATION
ITP_CROPPING
IVR_MESSAGE_VOLUME
Polycom®, Inc.
Description
The flag value determines how the ISDN B-channels within
configured spans are allocated.
The robustness of the ISDN network can be improved by
allocating channels evenly (load balancing) among the spans,
minimizing the effect of channel loss resulting from the malfunction
of a single span.
Set the flag value to:
LOAD_BALANCE - To allocate channels evenly among all
configured spans.
FILL_FROM_FIRST_CONFIGURED_SPAN -
To allocate all channels on the first configured span before
allocating channels on other spans.
FILL_FROM_LAST_CONFIGURED_SPAN -
To allocate all channels on the last configured span before
allocating channels on other spans.
Default: LOAD_BALANCE
When set to NO (default), this flag disables the telepresence
features in the Conference Profile.
Set the flag to YES to enable the telepresence features in the
Conference Profile (provided that the appropriate License is
installed).
If the conference is set to TelePresence mode, cropping of the
image is done according to this flag value:
ITP (default) - No cropping of left-right, symmetric cropping of
top-bottom.
CP - Symmetric cropping of both left-right and top-bottom areas
(separately calculated).
MIXED - Symmetric cropping of left-right areas and asymmetric
cropping of top-bottom areas (16% from top, 84% of bottom).
For illustrations of these three options, see Cropping.
Note: If the flag was added with no value, and the conference is
set to TelePresence mode, left-right areas are not cropped, and
top-bottom areas are asymmetric cropped (16% from top, 84%
from bottom),
The volume of IVR messages varies according to the value of this
flag.
Possible value range: 0-10 (Default: 6).
0 – disables playing the IVR messages
1 – lowest volume
10 – highest volume
Notes:
It is not recommended to disable IVR messages by setting the
flag value to 0.
System reset is not required for flag changes to take effect.
System Configuration Flags
Add?
778

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the realpresence 1800 and is the answer not in the manual?

This manual is also suitable for:

Realpresence 2000Realpresence 4000

Table of Contents