Defining The Snmp Parameters In The Collaboration Server - Polycom realpresence 1800 Administrator's Manual

Defining the SNMP Parameters in the Collaboration Server

The SNMP option is enabled via the Collaboration Server Web Client application.
The addresses of the Managers monitoring the MCU and other security information are defined in the
Collaboration Server Web Client application and are saved on the MCU's hard disk. Only users defined as
Administrator can define or modify the SNMP security parameters in the RMX Web Client application.
To enable SNMP option:
1 In the RMX Web Client menu bar, select Setup > SNMP.
The RMX SNMP Properties - Agent dialog box is displayed.
This dialog box is used to define the basic information for this MCU that will be used by the SNMP
system to identify it.
2 In the Agent dialog box, select the SNMP Enabled check box.
3 Click Retrieve MIB Files to obtain a file that lists the MIBs that define the properties of the object
being managed.
The Retrieve MIB Files dialog box is displayed.
4 Click Browse and navigate to the desired directory to save the MIB files.
5 Click OK.
The path of the selected directory is displayed in the Retrieve MIB Files dialog box.
6 Click Save.
The MIB files are saved to the selected directory.
7 Click Close to exit the Retrieve MIB Files dialog box.
8 In the Agent dialog box, define the parameters that allow the SNMP Management System and its
user to easily identify the MCU.
Polycom®, Inc.
Administration and Utilities
720