Initial System Configuration - Polycom RMX 1500 Quick Installation And Configuration Manual

2
Once the connection with the RMX is established and the RMX Web
Client Welcome screen is displayed, you can remove the USB key
from the RMX.
3
In the Welcome screen, enter the default Username (POLYCOM)
and Password (POLYCOM) and click Login.
The Product Activation dialog box is displayed with the serial
number filled in.
4
In the Activation Key field, enter or paste the Product Activation Key
retrieved earlier and click OK.
A message indicating that the Product Activation Key was loaded
successfully appears.
If you do not have an Activation Key, click the Polycom Resource
Center button to access the Service & Support page of the Polycom
Support website.
As no Default IP Network Service is defined, the system
automatically starts the Fast Configuration Wizard.
The Fast Configuration Wizard that is automatically started enables you
to configure the Default IP Service, set the RMX time, modify the default
Administrator user and set the basic system flags.
IPv4 is the default protocol for setting the Network Service in the Fast
Configuration Wizard.
The IP Management Service tab in the Fast Configuration Wizard is enabled
only if the default Management IP addresses were not modified.
1
In the Fast Configuration Wizard - IP dialog box, define the following
parameters:
Field
IP Service
Name
6

Initial System Configuration

Description
Use the default name (Default IP Service) or enter a name
using up to 20 characters.
Note: This field is displayed in all dialog boxes.