Setting The Encryption Flags - Polycom realpresence 1800 Administrator's Manual

Setting the Encryption Flags

Enabling the media encryption for the MCU is usually performed once an it is applicable to all conferences
running on the MCU.
To modify the Encryption flags:
1 Click Setup>System Configuration.
The System Flags dialog box opens.
2 Set the
FORCE_ENCRYPTION_FOR_UNDEFINED_PARTICIPANT_IN_WHEN_AVAILABLE_MODE flag
to YES or NO.
3 If recording will be used in encrypted conferences, set the
ALLOW_NON_ENCRYPT_RECORDING_LINK_IN_ENCRYPT_CONF flag to YES or NO.
4 Click OK.
For more information, see
5 Reset the MCU for flag changes to take effect.
Enabling Encryption in the Profile
Encryption for the conference is in the Profile and cannot be changed once the conference is running.
To enable encryption at the conference level:
» In the Conference Profile Properties – Advanced dialog box, select one of the following Encryption
options:
Polycom®, Inc.
Implementing Media Encryption for Secured Conferencing
Modifying System Flags.
157