Collaboration Server Configuration - Polycom realpresence 1800 Administrator's Manual

LAN Connections to the IP ports
IP Port
LAN 1
LAN 2

Collaboration Server Configuration

Once the network cables are connected to the Collaboration Server, you can modify the default IP Network
Service and add additional Network Services.
System Flags and License Settings
The MULTIPLE_SERVICES System Flag determines whether the Multiple Services option will be activated
once the appropriate license is installed. Possible Values: YES / NO Default: NO
This flag must be manually added to the system configuration and set to YES to enable this option. For more
information see .
If the MULTIPLE_SERVICES System Flag is set to YES and no RTM ISDN or RTM LAN card is
installed in the RealPresence Collaboration Server (RMX) 2000, an Active Alarm is displayed.
If the values or either of the MULTIPLE_SERVICES or V35_ULTRA_SECURED_SUPPORT
System Flags are changed from YES to NO, the defined IP Network Services are not displayed in
the IP Network Services list pane: they are, however, saved in the system.
If either of the flag values are changed back to YES, the saved defined IP Network Services will be
displayed.
IP Network Service Definition
Use this procedure to define Network Services in addition to the Network Service already defined during
first entry installation and configuration. Each of the defined Network Service can be associated with one or
more media cards installed in the system (depending on the system type).
Once a media card is associated with a Network Service it cannot be associated with another network
service.
Polycom®, Inc.
Description
Management, media and signaling for Network Service 1.
Media and signaling for Network Service 2.
Network Security
554