Sip Dial-In Busy Notification - Polycom realpresence 1800 Administrator's Manual

SIP Dial-in Busy Notification

When the system flag SEND_SIP_BUSY_UPON_RESOURCE_THRESHOLD is set to YES (NO is the
default), it enables the MCU to send a busy notification to a SIP audio endpoint or a SIP device when dialing
in to the MCU whose audio resource usage exceeded the Port Usage threshold.
The Collaboration Server will send a SIP busy response to SIP audio endpoints when:
● The system flag SEND_SIP_BUSY_UPON_RESOURCE_THRESHOLD is set to YES (NO is the
default)
● The port usage threshold for Audio resources is exceeded. The threshold is defined in the Setup >
Port Gauge dialog box.
When the flag is set to YES, the system will allow SIP audio endpoints to connect to the MCU until the Port
Usage threshold is reached. Once this threshold is exceeded, the SIP audio endpoints will not be able to
connect, ensuring that the remaining system resources can be used by all other connections, including SIP
video, H.323 cascaded links, and ISDN video. When the call is rejected by the MCU because of lack of
resources, the appropriate indication will be sent by the MCU to the SIP audio endpoint.
For example, if the Port Gauge threshold is set to 80%, when 80% of the Audio resources are used, the
system will not allow additional SIP audio endpoints to connect and will send a busy notification to the
endpoint.
This does not affect the video resources usage.
Polycom®, Inc.
Administration and Utilities
710