Modifying The Default Ip Network Service - Polycom realpresence 1800 Administrator's Manual

Modifying the Default IP Network Service

The Default IP Network Service is defined initially during the First Time Power-up or if the Default IP Service
has been deleted, followed by an Collaboration Server restart. For details, see Polycom® RealPresence
Collaboration Server (RMX) 1800/2000/4000 Getting Started Guide, Procedure 4: Modifying the Default IP
Service and ISDN/PSTN Network Service Settings.
Once the Default IP Network Service is defined, you can modify its properties through the IP Network
Properties dialog boxes. The Default IP Service parameters need to be modified if you want to change the:
● Network type that the Collaboration Server connects to
● IP address of the Collaboration Server Signaling Host
● IP addresses of the Collaboration Server Media boards
● Subnet mask of the Collaboration Server's IP cards
● Gatekeeper parameters or add gatekeepers to the Alternate Gatekeepers list
● SIP server parameters
To view or modify the Default IP Service:
1 In the RMX Management pane, click IP Network Services (
2 In the Network list pane, double-click the Default IP Service (
The Default IP Service - Networking IP dialog box is displayed.
Default IP Service - Collaboration Servers (RMX) 2000/4000
Polycom, Inc.
IP Network Services
).
, , or ) entry.
499