Polycom realpresence 1800 Administrator's Manual page 1010

4 In the Collaboration Server Web Client Login screen, enter the default Username (POLYCOM) and
Password (POLYCOM) and click the Login button.
The Fast Configuration Wizard starts.
For more information about First-time Power-up and the Fast Configuration Wizard see
First-time Power-up
Getting Started Guide.
5 Enter the following parameters using the information supplied by your network administrator:
 Control Unit IP Address
 Shelf Management IP Address
 Control Unit Subnet Mask
 Default Router IP Address
6 Click the Save & Close button.
The system prompts you to sign in with the new Control Unit IP Address.
7 Disconnect the LAN cable between the workstation and the LAN 2 Port on the Collaboration
Server's back panel.
8 Connect LAN 2 Port on the Collaboration Server's back panel to the local network using a LAN
cable.
9 Enter the new Control Unit IP Address in the browser's address line, using a workstation on the
local network, and press Enter to start the Collaboration Server Web Client application.
10 In the Collaboration Server Web Client Login screen, enter the default Username (POLYCOM) and
Password (POLYCOM) and click the Login button.
Polycom®, Inc.
Appendix G - Configuring Direct Connections to the Collaboration Server
in the Polycom RealPresence Collaboration Server (RMX) 1800/2000/4000
Procedure 1:
979