To modify the ULTRA_SECURE_MODE System flag value:
1 On the Collaboration Server menu, click Setup > System Configuration.
The System Flags dialog box opens.
2 Double-click or select the ULTRA_SECURE_MODE flag and click the Edit Flag button.
3 In the New Value field, enter the flag's new value - YES or NO.
4 Click OK to close the Update Flag dialog box.
5 Click OK to close the System Flags dialog box.
Note: Requires Reset
For flag changes (including deletion) to take effect, reset the MCU. For more information see
Resetting the Collaboration
System Flags affected by Ultra Secure Mode
When the ULTRA_SECURE_MODE flag is set to YES the default and range values of the following flags
are affected.
Polycom, Inc.
Server.
Ultra Secure Mode
818