Polycom realpresence 1800 Administrator's Manual page 824

The MCMS System Flags
Flag
RMX2000_RTM_LAN
RRQ_WITHOUT_GRQ
RTCP_FIR_ENABLE
RTCP_FLOW_CONTROL_TMMBR
_ENABLE
RTCP_FLOW_CONTROL_TMMBR
_INTERVAL
RTCP_PLI_ENABLE
RTCP_QOS_IS_EQUAL_TO_RTP
RTV_MAX_BIT_RATE_FOR_FORC
E_CIF_PARTICIPANT
Polycom®, Inc.
Description
This flag is used after installation on and RTM-LAN card to activate
the card. The flag must be set to YES. (RealPresence
Collaboration Server (RMX) 2000 only.)
To enable registration, some gatekeepers require sending first
RRQ and not GRQ.
Set flag to YES, if this behavior is required by the gatekeeper in
your environment.
Default: NO.
GRQ (Gatekeeper Request) - Gatekeeper discovery is the
process an endpoint uses to determine which gatekeeper to
register with.
RRQ - registration request sent to the gatekeeper.
When set to YES, the Full Intra Request (FIR) is sent as INFO
(and not RTCP).
Default = YES
Enables/disables the SIP RTCP flow control parameter.
Default: YES
Modifies the interval (in seconds) of the TMMBR (Temporary
Maximum Media Stream Bit Rate) parameter for SIP RTCP flow
control.
Range: 5 - 999 (seconds)
Default: 180
When set to YES, the (Picture Loss Indication (PLI) is sent as
INFO (and not RTCP).
Default = YES
Range: YES/NO
Default: YES
Enables the removal of empty video cells from a Video Layout.
System Configuration Flags
Add?








793