Polycom realpresence 1800 Administrator's Manual page 812

The MCMS System Flags
Flag
MANAGE_TELEPRESENCE_ROO
M_SWITCH_LAYOUTS
MAX_ALLOWED_RTV_HD_FRAME
_RATE
MAX_CONF_PASSWORD_REPEAT
ED_DIGITS
MAX_CP_RESOLUTION
Polycom®, Inc.
Description
Determines whether the MLA or the RMX controls the Room
Switch Telepresence Layouts.
• When set to NO, the RMX does not manage Telepresence
Room Switch Layouts and they continue to be managed by the
MLA.
• When set to YES, the RMX manages Telepresence Room
Switch Layouts.
Default: NO
Range: YES / NO
Note: System re-start is not required for this flag's settings to take
effect.
For more information see
Defines the threshold Frame Rate (fps) in which RTV Video
Protocol initiates HD resolutions.
Flag values are as follows:
Range: 0-30 (fps)
Default: 0 (fps) - Implements any Frame Rate based on Lync RTV
Client capabilities
Allows the administrator to configure the maximum number of
consecutive repeating characters that are to be allowed in a
conference password.
Range: 1 - 4
Default: 2
The MAX_CP_RESOLUTION flag value is applied to the system
during First Time Power-on and after a system upgrade. The
default value is HD1080.
All subsequent changes to the Maximum CP Resolution of the
system are made using the Resolution Configuration dialog box.
Possible flag values:
• HD1080 – High Definition at 60 fps
• HD1080 - High Definition at 30 fps
• HD720 – High Definition at 60 fps
• HD – High Definition at 30 fps
• SD30 – Standard Definition at 30 fps
• SD15 – Standard Definition at 15 fps
• CIF – CIF resolution
Default: HD1080
For more information see
Conferencing.
System Configuration Flags
Room Switch Telepresence
Video Resolutions in AVC CP
Add?

Layouts.



781