Polycom realpresence 1800 Administrator's Manual page 309

Entry Queue Definitions Parameters
Option
Entry Queue Mode
Entry Queue IVR Service
Cascade
Enable ISDN/PSTN
Access
ISDN/PSTN Network
Service
Polycom®, Inc.
Description
Select the mode for the Entry Queue
Standard Lobby (default) - When selected, the Entry Queue is used as a
routing lobby to access conferences. Participants connect to a single-dial lobby
and are routed to their destination conference according to the Conference ID
they enter.
Ad Hoc - Select this option to enable the Ad Hoc option for this Entry Queue. In
this mode, when the participant enters the target conference ID the system
checks whether a conference with that ID is already running on the MCU. If not,
the system automatically creates a new ongoing conference with that ID.
IVR Only Service Provider - When selected, designates this Entry Queue as a
special Entry Queue that provides IVR Services to SIP calls on behalf of the
RealPresence DMA system. The IVR Only Service Provider Entry Queue does
not route the SIP calls to a target conference. Instead the RealPresence DMA
system handles the call. For more details, see
(Shared Number Dialing).
External IVR Control - IVR Services can be controlled externally from an
application server (such as the DMA) supporting the MCCF-IVR (Media Control
Channel Framework-Interactive Voice Response) package.
When selected, the connection process of the participant to the conference via
the Virtual Entry Queue is controlled and managed by an external IVR service of
an application server (for example, DMA).
The default Entry Queue IVR Service is selected. If required, select an alternate
Entry Queue IVR Service, which includes the required voice prompts, to guide
participants during their connection to the Entry Queue.
Set this field to None for all Entry Queues other than cascading.
If this Entry Queue is used to connect dial-in cascaded links, select Master or
Slave depending on the Master/Slave relationship in the Cascading topology.
Set this field to Master if:
• The Entry Queue is defined on the MCU on level 1 and the dialing is done
from level 2 to level 1.
• The Entry Queue is defined on the MCU on level 2 and the dialing is done
from level 3 to level 2.
Set this field to Slave if the Entry Queue is defined on the MCU on level 2
(Slave) and the dialing is done from MCU level 1 to level 2.
Select this check box to allocate dial-in numbers for ISDN/PSTN connections.
To define the first dial-in number using the default ISDN/PSTN Network Service,
leave the default selection. When the Entry Queue is saved on the MCU, the
dial-in number will be automatically assigned to the Entry Queue. This number
is taken from the dial-in numbers range in the default ISDN/PSTN Network
Service.
The default Network Service is automatically selected. To select a different
ISDN/PSTN Network Service in the service list, select the name of the Network
Service.
Entry Queues, Ad Hoc Conferences and SIP Factories
IVR Provider Entry Queue
278