Removing The Paddle Unit; Removing The Paddle - Canon Finisher-AK1 Service Manual

4
Parts Replacing and Cleaning > Intermediate Process Tray Assembly > Removing the paddle > Procedure

Removing the Paddle Unit

■ Preparation
1) Remove the Stack Wall (Lower).(Refer to page 4-29)
2) Remove the Stack Wall (Upper).(Refer to page 4-27)
3) Remove the Neat Stack Unit (Lower).(Refer to page 4-59)
4) Remove the Process Tray Unit.(Refer to page 4-62)
■ Procedure
1) Turn the Paddle Shaft [1] until it can be accessed to the screw, and remove the 2 Paddle
Units [2].
• 3 Screws [3]
x2
[3]
4 Parts Replacing and Cleaning > Intermediate Process Tray Assembly > Removing the paddle > Procedure
[2]
[1]
[3]
F-4-151

Removing the paddle

■ Preparation
1) Remove the Stack Wall (Lower).(Refer to page 4-29)
2) Remove the Stack Wall (Upper).(Refer to page 4-27)
3) Remove the Neat Stack Unit (Lower).(Refer to page 4-59)
4) Remove the Process Tray Unit.(Refer to page 4-62)
5) Remove the Paddle Unit.(Refer to page 4-65)
■ Procedure
1) Release the 2 claws [1] to remove the Paddle Retainer Block [2], and remove the paddle [3].
[1]
4-65
[2]
[3]
[1]
F-4-152
4-65