Show Bgp Neighbors - Cisco Nexus 3548 Command Reference Manual

Chapter Unicast Routing Show Commands

show bgp neighbors

To display Border Gateway Protocol (BGP) neighbors, use the show bgp neighbors command.
Syntax Description ip
ipv4
unicast
multicast
addr
advertised-routes
flap-statistics
paths
received-routes
routes
advertised
dampened
received
vrf vrf-name
all
Command Default None
Command Modes Any command mode
Command History Release
5.0(3)A1(1)
Usage Guidelines This command requires the LAN Enterprise Services license.
Examples This example shows how to display the BGP neighbors:
switch(config)# show bgp ipv4 unicast neighbors
BGP neighbor is 192.168.0.201,
Description: Peer Router B
BGP version 4, remote router ID 0.0.0.0
OL-27852-01
show bgp {ip | ipv4} {unicast | multicast} neighbors [addr [advertised-routes | flap-statistics |
paths | received-routes | routes [advertised | dampened | received]]] [vrf {all | vrf-name}]
Displays the IPv4 neighbor information.
Displays the IPv4 neighbor information.
Displays the unicast neighbor information.
Displays the multicast neighbor information.
(Optional) IPv4 address. The format is x.x.x.x
(Optional) Displays all the routes advertised to this neighbor.
(Optional) Displays flap statistics for the routes received from this neighbor.
(Optional) Displays AS paths learned from this neighbor.
(Optional) Displays all the routes received from this neighbor.
(Optional) Displays the routes received or advertised to or from this
neighbor.
(Optional) Displays all the routes advertised for this neighbor.
(Optional) Displays all dampened routes received from this neighbor.
(Optional) Displays all the routes received from this neighbor.
(Optional) Specifies the virtual router context (VRF) name. The name can be
any case-sensitive, alphanumeric string up to 32 characters.
Specifies all VRF instances.
Modification
This command was introduced.
remote AS 201, ibgp link,
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
show bgp neighbors
Peer index 1
413