Rep 8.2.3.16 Mailbox In Sensor - Xerox DocuPrint N24 Service Manual

Network laser printer

Hide thumbs Also See for DocuPrint N24:

Table of Contents

REP 8.2.3.16 Mailbox IN Sensor

Parts List on PL 8.2.2.6

1 Switch off the printer power and disconnect the AC Power Cord.

2 Open the Left Cover Assembly.

3 Remove the screw securing the Mailbox IN Sensor to the Mailbox frame, and remove the Sensor

(Figure 8.2.3.16a).

4 Disconnect the P/J from the Mailbox IN Sensor (Figure 8.2.3.16a).

1 Reconnect the Mailbox IN Sensor P/J.

2 Reinstall the Mailbox IN Sensor, and use one screw to secure it to the Mailbox frame. Make sure

you insert the Sensor actuator through the rectangular slot.

3 Close the Left Cover Assembly.

4 Verify proper operation.

DocuPrint N24, N32 and N40 Service Manual

Figure 8.2.3.16a. Mailbox IN Sensor.

Table of Contents