Registration (Lead Edge to Trail Edge)
Measure the registration on two consecutive System Controller Test Prints. Fold the lead edge to
trail edge and crease the paper. Observe the fold at the zero reference line, (Figure 7.33f).
1 The fold is within +/- 1.5 mm from the zero reference line.
Y
N
|
Go to ADJ 4.1.
2 The test prints meet the registration specification. Go to the Registration (Inboard to Outboard)
checkout on the next page.
Figure 7.33f. System Controller Test Print (lead edge to trail edge)
Zero Reference
Line
Repair Analysis Procedures (RAP)
2/2000
7-50
DocuPrint N24, N32, N40, N3225, and N4025
SR1503R