10 Enter Output Test, Feed Clutch Operation (Select SMH/ENV) to actuate the Envelope Feed
Clutch. The Envelope Feed Clutch energizes when Output Test starts.
Y
N
|
Replace the Envelope Feed Clutch (PL 8.3.2.2).
11 Replace the Envelope Feeder Belt (REP 8.3.3.8).
12 Measure the voltage between P/J700-7 and P/J700-12 (WIR 8.3.5.1) on the Envelope Feeder
PWB. There is +24VDC between P/J700-7 and P/J700-12 (WIR 8.3.5.1).
Y
N
|
Check the wiring between P/J 700 and P/J 403 (WIR 8.3.5.1). If OK, replace the Printer
Engine Controller PWB (REP 4.10.6).
13 Replace the Envelope Feeder Motor (REP 8.3.3.6). If the problem still exists, replace the
Envelope Feeder PWB (REP 8.3.3.7).
Options
3/99
8-158
DocuPrint N24, N32 and N40 Service Manual