6 Reinstall the Drive Transmission Gear and E-ring.
7 Reinstall the Take Away Gear and the E-ring.
8 Reinstall the Tray 3 Feed Clutch and E-ring.
9 Reinstall the Stopper Bracket and secure with the screws.
10 Reinstall the Feed In Chute and secure with the screw.
11 Reinstall the Inner Chute and secure with the screws.
12 Reinstall the Retard Spring.
13 Reinstall the plastic Upper Take Away Chute on the front and rear white plastic bearings.
14 Close the HCF Left Cover.
15 Reinstall the HCF Rear Cover.
16 Reinstall Tray 3.
17 Verify proper operation.
Options
Figure 8.4.3.13a. Tray 3 Take Away Roll.
3/99
8-210
DocuPrint N24, N32 and N40 Service Manual