Xerox DocuPrint N24 Service Manual page 955

8.5.6.4.2 Compiler
The Compiler arranges paper into sets.
1 Tamper Motor
Drives the paper stack Tamper.
2 Tamper Home Sensor
Monitors the position of the Tamper.
3 Compiler Bin Up/Down Solenoid
Tilts the Compiler Bin when the paper stack reaches 25 sheets.
4 End Wall Open/Close Motor
Controls the opening and closing of the End Wall.
5 End Wall Open Sensor
Monitors the position of the End Wall.
6 Compiler Bin Exit Sensor
Monitors paper leaving the entrance area of the Compiler. The signal from the Sensor is used by
the Finisher logic to start and stop the Transport Motor and the Eject Motor.
DocuPrint N24, N32 and N40 Service Manual
3/99
8-517 Options