Xerox DocuPrint N24 Service Manual page 843

Network laser printer

Hide thumbs Also See for DocuPrint N24:

Table of Contents

1 Position the Offset Home Sensor into the cutout in the Sensor Bracket.

2 Reconnect J844 to the Offset Home Sensor.

3 Secure the two wire harnesses in the wire clamp that is attached to the Bracket.

4 Reinstall the Offset Home Sensor Bracket onto the Finisher frame. Use two screws to secure the

Bracket to the frame.

5 Reinstall the Upper Rear Cover.

DocuPrint N24, N32 and N40 Service Manual

Chapters

Table of Contents