Xerox DocuPrint N24 Service Manual page 652

Network laser printer

Hide thumbs Also See for DocuPrint N24:

Table of Contents

NOTE: There are two sizes of cables, the longer cable goes furthest from pulley.

1 Install the new cables through the Bottom Lift Plate and over the Idler Pulleys.

2 Place the cable anchors in the holes in the Bottom Plate Lift Shaft and slide Bottom Plate Idle Lift

Pulley over the cables to engage the cable anchors.

3 Reinstall the Bottom Plate Lift Gear and E-ring.

4 Reinstall the Tray 4 Retard Gear Bracket.

5 Reinstall the Tray 4 shaft cover.

6 Reinstall the Tray 4 Front Cover.

7 Reinstall Tray 4.

DocuPrint N24, N32 and N40 Service Manual

Chapters

Table of Contents