7 Use an E ring to secure the front of the Paddle Shaft to the front bearing.
8 Reinstall the Exit Chute Assembly onto the Finisher frame.
9 Use four screws to secure the Exit Chute Assembly to the Finisher frame.
10 Slide the metal bearing onto the rear of the Paddle Drive Shaft, and use an E ring to secure the
bearing to the rear of the Finisher.
11 Reinstall the Exit Shaft Assembly.
12 Reinstall the Upper Exit Chute Assembly.
13 Reinstall the Eject Pinch Roll Assembly.
14 Reinstall the Eject Chute Assembly
15 Reinstall the Eject Cover.
16 Reinstall the Upper Rear Cover.
17 Reinstall the Stapler Door Inner Cover Assembly.
DocuPrint N24, N32 and N40 Service Manual
Figure 8.5.3.66a. Exit Chute.
3/99
8-421
Options