Xerox DocuPrint N24 Service Manual page 154

Figure 4.2.12b. Tray 2 Retard Assembly.
Replacement
1 Reinstall the Feeder Assembly into position. Ensure the Feed Shaft bearing is in the support
bracket.
2 Reinstall the Tray 2 Retard Clutch, Spacer and Roll.
3 Reinstall the Tray 2 - One Way Clutch.
4 Reinstall Tray 2 Gear Assembly and secure with the E-ring.
5 Reinstall the Tray 2 Feed Clutch.
6 Reinstall the Lower Rear Cover.
7 Reinstall the Upper Rear Cover.
8 Reinstall the Lift Up Sensor.
9 Reinstall Tray 2.
10 Verify proper operation.
2/2000
Repair Procedures 4-40 DocuPrint N24, N32, N40, N3225 and N4025