Rap 8.5.7.8 Error Code "Close Cover G - Xerox DocuPrint N24 Service Manual

RAP 8.5.7.8 Error Code "Close Cover G"

1 Open and close the Top Cover. The error code reappears.
Y N
|
Problem solved.
2 Open the Top Cover and inspect the molded tab that actuates the Top Cover Interlock Switch.
The actuator tab is in good condition (unbroken).
Y N
|
Replace the Top Cover Assembly (REP 8.5.3.72).
3 Enter Diagnostic Mode - Input H/L - Top Cover Interlock Switch. Actuate and deactuate the Top
Cover Interlock Switch. The Control Panel LCD displays L when the Switch is actuated and H
when the Switch is deactuated.
Y N
|
Replace the Top Cover Interlock Switch (REP 8.5.3.75).
4 Replace the Finisher PWB (REP 8.5.3.83). The error code reappears.
Y N
|
Problem solved.
5 Replace the Printer Engine Controller PWB (REP 4.10.6).
DocuPrint N24, N32 and N40 Service Manual
3/99
8-545 Options