Xerox DocuPrint N24 Service Manual page 827

Replacement
1 Reinstall the Tamper Motor onto the Compiler Bin and slip the Tamper Motor Drive Belt over the
Motor Pulley.
2 Reposition the Motor so it presses firmly against the Compiler Bin and use the two screws to
secure the Motor to the Compiler Bin.
3 Reinstall the Eject Roll Chute and use the four screws to secure it to the frame.
4 Reinstall the Tie Plate and use the four screws to secure it to the frame.
5 Reinstall the Top Bin Assembly.
6 Reinstall the Upper Left Cover.
7 Reinstall the Transport Assembly.
8 Reinstall the Upper Rear Cover.
9 Reinstall the Stapler Door Inner Cover Assembly.
10 Reconnect the Finisher to the printer.
DocuPrint N24, N32 and N40 Service Manual
Figure 8.5.3.49b. Tamper Motor.
3/99
8-389 Options