Xerox DocuPrint N24 Service Manual page 661

Replacement
1 Install the new rear cables through the Bottom Lift Plate and over the Idler Pulleys.
2 Place the cable anchors in the holes in the Bottom Plate Lift Shaft and slide the Rear Bottom
Plate Lift Pulley over the cables to engage the cable anchors.
3 Reinstall the Bottom Plate Lift Shaft.
4 Install the new front cables through the Bottom Lift Plate and over the Idler Pulleys.
5 Place the cable anchors in the holes in the Bottom Plate Lift Shaft and slide the Front Bottom
Plate Lift Pulley over the cables to engage the cable anchors.
6 Secure the Front Bottom Plate Lift Pulley with the E-ring.
7 Reinstall the Bottom Plate Lift Gear and E-ring.
8 Reinstall the Tray 5 Retard Gear Bracket.
9 Reinstall the Tray 5 Front Cover.
DocuPrint N24, N32 and N40 Service Manual
3/99
8-223 Options