8.4.3 Repair Procedures
REP 8.4.3.1 HCF Rear Cover
Parts List on PL 8.4.2.1
Removal
1 Switch the printer power off and disconnect the AC power cord.
2 Remove the two screws securing the Rear Cover to the HCF frame (Figure 8.4.3.1a).
3 Lift up on the Rear Cover and remove it from the frame.
Replacement
1 Slip the two tabs that are located at the bottom of the Rear Cover into the openings at the bottom
of the HCF frame.
2 Slide the edges the Rear Cover into the groves in the Left and Right Covers.
3 Use two screws to secure the Rear Cover to the HCF frame.
DocuPrint N24, N32 and N40 Service Manual
Figure 8.4.3.1a. Rear Cover
3/99
8-193
Options