Xerox DocuPrint N24 Service Manual page 643

Network laser printer

Hide thumbs Also See for DocuPrint N24:

Table of Contents

REP 8.4.3.11 Feed, Nudger, and Retard Rolls - Trays 3~5

Parts List on PL 8.4.2.5

Replace the Feeder, Nudger, and Retard Rolls as a unit.

1 Switch the printer power off and disconnect the AC power cord.

2 Remove the paper tray from the appropriate feeder.

3 Use a small screwdriver to gently pull out on the tab on the front of the Chute, and remove the

Chute (Figure 8.4.3.11a).

4 Pull out on the Roll latch and slide the Roll off of the shaft (Figure 8.4.3.11a).

5 Repeat step 4 for the remaining two Rolls.

Figure 8.4.3.11a. Feed, Nudger, and Retard Rolls - Trays 3~5

DocuPrint N24, N32 and N40 Service Manual

Chapters

Table of Contents