Xerox DocuPrint N24 Service Manual page 330

T-
Temp Temperature
Test Print Mode The mode of operation that lets you generate a test pattern
Test Pattern A grid that is generated by the Printer Engine Controller
Toggle To switch between two states, such as on and off or up and down
Toner The dry ink that is used to create the visible image. Toner is stored in the EP Cartridge
TR Signal name for Transfer current
Transfer Moving the toner image from the surface of the drum to the surface of a sheet of paper
TTL Transistor Transistor Logic
V-
V Volts
W-
Warm-up The time it takes the printer to go from main power ON to Ready to Print
Wire Harness A bundle of wires that form a single unit and are generally terminated with connectors at both
ends.
General Procedures and Information
2/2000
5-102 DocuPrint N24, N32, N40, N3225, and N4025