Xerox DocuPrint N24 Service Manual page 359

Before entering the RAPs, check to ensure:
1 The printer plugged into a recommended AC wall outlet.
2 The AC power provided at the wall outlet within recommended specifications.
3 The AC power cord connected to the printer.
4 The AC power cord in good condition; not frayed or broken.
5 The printer properly grounded through the AC wall outlet.
6 The printer located in an area where the temperature and humidity are moderate and stable.
7 The printer located in an area that is free of excessive dust.
8 The printer located in an area away from water outlets, steamers, electric heaters, volatile gases,
or open flames.
9 The printer shielded from the direct rays of the sun.
10 The printer has recommended space around all sides for proper ventilation.
11 The printer sitting on a level and stable surface.
12 The recommended paper stock is being used in the printer.
13 The customer uses the printer as instructed in the User Manual.
14 Consumables, such as the Print Cartridge (EP Cartridge), replaced at recommended intervals.
DocuPrint N24, N32 and N40 Service Manual
3/99
7-5 Repair Analysis Procedures (RAP)