Rep 4.3.6 Mbf No Paper Sensor Assembly - Xerox DocuPrint N24 Service Manual

REP 4.3.6 MBF No Paper Sensor Assembly

Parts List on PL 4.3
Removal
1 Switch off the printer power and disconnect the AC Power Cord.
2 Remove the Duplex Unit, if one is installed.
3 Remove the MBF Assembly (REP 4.3.1).
4 Remove the two screws securing the MBF Top Cover to the MBF Assembly, and remove the Top
Cover (Figure 4.3.6a).
5 Remove the screw securing the MBF No-Paper Sensor Bracket to the Feeder Assembly, and lift
the Sensor Bracket off of the Feeder (Figure 4.3.6b).
6 Disconnect the P/J from the No-Paper Sensor (Figure 4.3.6b).
7 Squeeze the Sensor latches and remove the Sensor from the Bracket (Figure 4.3.6b).
Repair Procedures
Figure 4.3.6a. MBF Assembly Cover.
2/2000
4-50 DocuPrint N24, N32, N40, N3225 and N4025