REP 4.16 Feed Idler Gear
Parts List on
PL 4.6
Removal
1.
Switch off the machine, then disconnect the power cord.
2.
Remove the Left Side Cover,
REP
3.
Remove the Feed Clutch and Drive Gear,
a.
Remove the E-ring and Washer from the Feeder Clutch.
b.
Remove the Feeder Clutch and Drive Gear.
Feed Clutch
Figure 1 Feed Clutch Removal
Initial Release
Xerox® B210 Service Manual
2.2.
Figure
1:
4.
Remove the snap-ring, then remove the Idler Gear,
Feed Idler Gear
Replacement
Replacement is the reverse of the removal procedure.
July 2019
4-39
Figure
2.
Figure 2 Feed Idler Gear
Repairs - Adjustments
REP 4.16