Rep 4.10.8 System Controller Pwb Cover - Xerox DocuPrint N24 Service Manual

REP 4.10.8 System Controller PWB Cover

Parts List on PL 11.3
Removal
1 Switch off the printer power and disconnect the AC Power Cord.
2 Remove the Fuser Full Cover (REP 4.1.1).
3 Remove the Top Cover Assembly (REP 4.1.2).
4 Remove the fourteen screws that secure the System Controller PWB Cover to the System
Controller PWB Box.
5 Lift the System Controller PWB Cover off of the System Controller PWB Box.
Replacement
1 Reinstall the System Controller PWB Cover onto the top of the System Controller PWB Box.
2 Use fourteen screws to secure the System Controller PWB Cover to the System Controller PWB
Box.
3 Reinstall the Top Cover Assembly.
4 Reinstall the Fuser Full Cover.
5 Verify proper operation.
Repair Procedures
Figure 4.10.8a. System Controller PWB Cover.
2/2000
4-94 DocuPrint N24, N32, N40, N3225 and N4025