Rep 8.1.3.11 Duplex Wait Sensor - Xerox DocuPrint N24 Service Manual

REP 8.1.3.11 Duplex Wait Sensor

Parts List on PL 8.1.2.4
Removal
1 Switch off the printer power and disconnect the AC Power Cord.
2 Remove the Duplex Cover (REP 8.1.3.2).
3 Set the Duplex Module on end so you can access the Wait Sensor.
4 Remove the screw securing the Wait Sensor Bracket to the Duplex frame (Figure 8.1.3.11a).
5 Remove the Bracket and the attached Wait Sensor (Figure 8.1.3.11a).
6 Squeeze the four latches securing the Sensor to the bracket and remove the Sensor (Figure
8.1.3.11a).
7 Disconnect the P/J from the Sensor.
DocuPrint N24, N32 and N40 Service Manual
Figure 8.1.3.11a. Duplex Wait Sensor
3/99
8-39 Options