Xerox DocuPrint N24 Service Manual page 497

11 Verify the voltage from P/J 224-2 and FG (WIR 8.1.5.1) goes from +24VDC to 0VDC when
Diagnostic Mode-Output Test, Duplex Operation (Wait Clutch) is entered. Voltage changes from
+24VDC to 0VDC.
Y N
|
Replace the Duplex Wait Clutch (REP 8.1.3.6).
12 Replace the Exit Roll (REP 8.1.3.10).
3/99
DocuPrint N24, N32 and N40 Service Manual 8-59 Options