Xerox DocuPrint N24 Service Manual page 598

8 With Output Tests, ENV Feed Motor Operation and Feed Clutch Operation (Select (SMH/ENV)
running, observe the Transport Rolls. The Transport Rolls rotate smoothly without stalling or
slipping.
Y N
|
Replace the Envelope Feeder Motor (REP 8.3.3.6) and the Envelope Feed Clutch (PL
8.3.2.2).
9 Clean or replace the Transport Rolls.
10 Measure the voltage between P/J700-7 and P/J700-12 (WIR 8.3.5.1) on the Envelope Feeder
PWB. There is +24VDC between P/J700-7 and P/J700-12 (WIR 8.3.5.1).
Y N
|
Check the wiring between P/J 700 and P/J 403 (WIR 8.3.5.1). If OK, replace the Printer
Engine Controller PWB (REP 4.10.6).
11 Replace the Envelope Feeder Motor (REP 8.3.3.6).
Options
3/99
8-160 DocuPrint N24, N32 and N40 Service Manual