Rep 8.5.3.72 Top Cover Assembly - Xerox DocuPrint N24 Service Manual

Network laser printer

Hide thumbs Also See for DocuPrint N24:

Table of Contents

REP 8.5.3.72 Top Cover Assembly

Parts List on PL 8.5.2.15

1 Switch off the printer power and disconnect the AC Power Cord.

2 Open the Top Cover.

3 Remove the screw securing the Cover Bracket to the Cover (Figure 8.5.3.72a).

4 Slide the Cover to the side so the pivot slides out of the pivot hole, and pull the Top Cover away

from the Finisher (Figure 8.5.3.72a).

1 Insert the Top Cover pivot into the pivot hole in the Finisher.

2 Pull the Bracket up into position against the Top Cover, making sure you align the positioning

hole in the Bracket with the positioning tab on the Cover.

3 Use one screw to secure the Bracket to the Top Cover.

4 Close the Top Cover.

Figure 8.5.3.72a. Top Cover Assembly.

DocuPrint N24, N32 and N40 Service Manual

Table of Contents