Xerox DocuPrint N24 Service Manual page 426

9 The printer contains additional SIMM/DIMM(s).
Y N
|
The System Controller PWB and installed SIMM/DIMM appear to be functioning properly.
Problem solved.
10 Switch the AC power off, remove the System Controller PWB. Install one additional SIMM/DIMM
into slot 3. Reinstall the System Controller PWB, switch the printer power on, and print a
Configuration Sheet. The amount of memory listed on the Configuration Sheet is Base Memory
plus the value of the three SIMM/DIMM(s).
Y N
|
Replace the last SIMM installed (PL 11.3).
11 The printer contains additional SIMM/DIMM(s).
Y N
|
The System Controller PWB and installed SIMM/DIMM appear to be functioning properly.
Problem solved.
12 Switch the AC power off, remove the System Controller PWB. Install one additional SIMM into
slot 4. Reinstall the System Controller PWB, switch the printer power on, and print a
Configuration Sheet. The amount of memory listed on the Configuration Sheet is Base Memory
plus the value of the four SIMMs.
Y N
|
Replace the last SIMM installed (PL 11.3).
13 The printer contains additional SIMMs.
Y N
|
The System Controller PWB and installed SIMM appear to be functioning properly.
Problem solved.
14 Switch the AC power off, remove the System Controller PWB. Install one additional SIMM into
slot 5. Reinstall the System Controller PWB, switch the printer power on, and print a
Configuration Sheet. The amount of memory listed on the Configuration Sheet is Base Memory
plus the value of the five SIMMs.
Y N
|
Replace the last SIMM installed (PL 11.3).
15 The System Controller PWB and installed SIMM appear to be functioning properly. Problem
solved.
16 Switch the AC power off. Remove System Controller PWB and move SIMM/DIMM in slot 1 to slot
2. Reinstall the System Controller and switch on the printer power. Print a configuration sheet.
The amount of memory listed on the Configuration Sheet is Base Memory plus the value of the
SIMM/DIMM.
Y N
|
Replace the SIMM/DIMM.
17 Replace the System Controller PWB (REP 4.10.7).
Repair Analysis Procedures (RAP)
2/2000
7-72 DocuPrint N24, N32, N40, N3225, and N4025