REP 8.5.3.17 Elevator Motor
Parts List on PL 8.5.2.4
Removal
1 Switch off the printer power and disconnect the AC Power Cord.
2 Disconnect the Finisher from the Printer (REP 8.5.3.1).
3 Remove the Lower Left Cover (REP 8.5.3.6).
4 Remove the E-ring that secures the Drive Pulley to the motor shaft (Figure 8.5.3.17a).
5 Remove the Drive Pulley and the Drive Belt from the drive motor (Figure 8.5.3.17a).
6 Disconnect J865 (Figure 8.5.3.17a).
7 Remove the two screws securing the Elevator Motor to the Motor Bracket, and remove the Motor
(Figure 8.5.3.17a).
Options
Figure 8.5.3.17a. Elevator Motor.
3/99
8-336
DocuPrint N24, N32 and N40 Service Manual