Rep 8.4.3.7 Tray 3 Paper Size Sensor Pwb - Xerox DocuPrint N24 Service Manual

Network laser printer

Hide thumbs Also See for DocuPrint N24:

Table of Contents

REP 8.4.3.7 Tray 3 Paper Size Sensor PWB

Parts List on PL 8.4.2.3

1 Switch the printer power off and disconnect the AC power cord.

2 Slide Paper Tray 3 out of the HCF.

3 Disconnect the P/J from the Size Sensor PWB (Figure 8.4.3.7a).

4 Remove the screw securing the Tray 3 Paper Size Sensor PWB to the HCF frame and remove

the Sensor (Figure 8.4.3.6a).

1 Reinstall the Tray 3 Paper Size Sensor PWB onto the HCF frame.

2 Align the positioning tabs.

3 Use one screw to secure the PWB to the frame.

4 Reconnect the P/J to the Size Sensor PWB.

5 Reinstall Paper Tray 3.

DocuPrint N24, N32 and N40 Service Manual

Figure 8.4.3.7a. Tray 3 Paper Size Sensor PWB

Table of Contents