Resolution
Refer to (Figure 7.33e). Observe the three image areas on several System Controller Test Prints.
Check the resolution of the images in each of the areas:
Area 1:
The two pixel vertical, horizontal and diagonal lines should be clear and continuous. The
diagonal lines may appear to be narrower than the others.
Area 2:
The text paragraphs should be roughly equal in density.
Area 3:
The 50% half tone patches adjacent to the solid blocks in the corners should measure .70 or
greater on the Output Reference document (82P520).
1 The resolution of the image meets the specification.
Y
N
|
Replace the following components in order EP Cartridge (PL 7.2), HVPS (REP 4.10.4).
2 Go to the Registration (Lead Edge to Trail Edge) checkout on the next page.
Area 2
Area 3
DocuPrint N24, N32, N40, N3225, and N4025
Figure 7.33e. System Controller Test Print (resolution)
Area 1
2/2000
7-49
Repair Analysis Procedures (RAP)
SR1503R