Rep 8.5.3.58 Offset Home Sensor - Xerox DocuPrint N24 Service Manual

Network laser printer

Hide thumbs Also See for DocuPrint N24:

Table of Contents

REP 8.5.3.58 Offset Home Sensor

Parts List on PL 8.5.2.19

1 Switch off the printer power and disconnect the AC Power Cord.

2 Remove the Upper Rear Cover (REP 8.5.3.5).

3 Remove the two screws securing the Offset Home Sensor Bracket to the Finisher frame, and

remove the Bracket (Figure 8.5.3.58a).

4 Free the two wire harnesses from the wire clamp that is attached to the Bracket.

5 Disconnect J844 from the Offset Home Sensor (Figure 8.5.3.58a).

6 Press in and release the Sensor latches that secure the Sensor to the Bracket, and remove the

Sensor (Figure 8.5.3.58a).

Figure 8.5.3.58a. Offset Home Sensor.

DocuPrint N24, N32 and N40 Service Manual

Table of Contents