Xerox DocuPrint N24 Service Manual page 202

Replacement
1 Reinstall the HVPS Assembly onto the printer frame.
2 Align the two positioning holes on the HVPS with the two tabs on the frame.
3 Make sure you do not trap any wire harnesses between the HVPS Assembly and the printer
frame.
4 Push the HVPS against the frame until the two clips snap into place.
5 Use two screws to secure the HVPS Assembly into place on the printer frame.
6 Reconnect the five P/Js to the HVPS PWB.
— Blue to BTR
— White to DTS
— White to FB
— Black to CB
— P500
7 Reinstall the Printer Engine Controller PWB.
8 Verify proper operation.
Repair Procedures
2/2000
4-88 DocuPrint N24, N32, N40, N3225 and N4025