Rep 4.4 Registration; Rep 4.4.1 Registration Clutch - Xerox DocuPrint N24 Service Manual

REP 4.4 Registration

REP 4.4.1 Registration Clutch

Parts List on PL 6.1
Removal
1 Switch off the printer power and disconnect the AC Power Cord.
2 Remove the Upper Rear Cover Assembly (REP 4.1.3).
3 Disconnect connector (P/J 200) from the Registration Clutch (Figure 4.4.1a).
4 Remove the E-ring securing the Registration Clutch to the Registration Shaft (Figure 4.4.1a).
5 Push on the shaft latch as you slide the Clutch off of the shaft (Figure 4.4.1a).
Replacement
1 Slide the Registration Clutch onto the shaft.
2 Use the E-ring to secure the Registration Clutch to the Registration Shaft.
3 Reconnect P/J 200 from the Registration Clutch.
4 Reinstall the Rear Cover.
5 Verify proper operation.
DocuPrint N24, N32, N40, N3225, and N4025
Figure 4.4.1a. Registration Clutch.
2/2000
4-55 Repair Procedures