Xerox DocuPrint N24 Service Manual page 536

Replacement
1 Slide the Front Bearing onto the Roll.
2 Slide the Rear Bearing onto the Roll.
3 Align the Mailbox Exit Roll so the keyed end of the Roll is positioned on the drive side of the Bin.
4 Slide the ends of the Exit Roll into the holes in the Bin.
5 Rotate the Rear Bearing until it slides into the hole in the Bin.
6 Use an E-ring, behind the Rear Bearing, to secure the Roll to the Bin.
7 Slide the Collar and Drive Pulley onto the end of the Roll.
8 Use an E-ring to secure the Pulley to the Roll.
9 Reinstall the Gate onto the Bin Assembly.
10 Reinstall the ACT Cover Assembly.
Options
3/99
8-98 DocuPrint N24, N32 and N40 Service Manual