Rep 8.5.3.21 Bottom Bin Lower & Upper Limit Sensors - Xerox DocuPrint N24 Service Manual

REP 8.5.3.21 Bottom Bin Lower & Upper Limit Sensors
Parts List on PL 8.5.2.5
Removal
1 Switch off the printer power and disconnect the AC Power Cord.
2 Remove the Harness Cover (REP 8.5.3.8).
3 Remove the Bottom Bin Assembly (REP 8.5.3.18).
4 Remove the Bottom Bin Rear Cover (REP 8.5.3.19).
5 Remove the screw securing the Sensor Bracket to the Bin Frame, and remove the Bracket
(Figure 8.5.3.21a).
6 Disconnect P850 from the Upper Limit Sensor (Figure 8.5.3.21a).
7 Press in and release the Sensor latches that are securing the Sensor to the Bracket, and remove
the Sensor.
8 Disconnect P851 from the Lower Limit Sensor (Figure 8.5.3.21a).
9 Press in and release the Sensor latches that are securing the Sensor to the Bracket, and remove
the Sensor.
Options
Figure 8.5.3.21a. Lower & Upper Limit Sensors.
3/99
8-344 DocuPrint N24, N32 and N40 Service Manual